Hoya Colored Glass Longpass Filters
- UV, VIS and IR Pass Ranges
- VIS Can Be Used for Color Bandpass
- Also Available Mounted
Hard Coated OD 4.0 10nm Bandpass Filters
TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
Top Seller
SCHOTT Colored Glass Longpass Filters
- 27 Standard SCHOTT Color Glass Types
- Cut-On Wavelengths in the UV, Visible, or NIR
- Standard Circular and Square Sizes with 1, 2, or 3mm Thickness
Fluorescence Bandpass Filters
TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
- Common Wavelengths for Popular Fluorophores
- Excitation Filters and Emission Filters Available
- >93% Transmission
- >OD 6 Blocking, <3% from Edge of Bandwidth
- Fluorescence Filter Sets and Pre-Mounted Fluorescence Filter Cube Sets Also Available
OD 2.0 Longpass Filters
TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
- Sharp Cut-On Wavelength
- High Rejection/Transmission Efficiency
- Precision Fused Silica Substrate
- Variety of OD 2.0 Longpass Filter Kits are Available
Hard Coated OD 4.0 50nm Bandpass Filters
TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
Top Seller
- High Transmission, Deep Blocking
- Broad Bandwidths Ideal for Imaging Applications
- Available in VIS and IR Center Wavelengths
- Hard Coated OD 4.0 10nm and 25nm Bandpass Filters Also Available
OD 2.0 Shortpass Filters
TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
- Sharp Cut-Off Wavelength
- High Transmission / Rejection Efficiency
- Precision Fused Silica Substrate
SCHOTT NG Absorptive Neutral Density (ND) Filters
- Tightly Controlled Transmission Specifications
- NG4, NG9, or NG11 Glass Types
- Specified Optical Densities from 0.15 to 5.0
- Provide Even Light Attenuation in the Visible Spectrum
- SCHOTT NG Gray Glass Also Available
Hard Coated OD 4.0 25nm Bandpass Filters
TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
SCHOTT Colored Glass Bandpass Filters
- 20 Standard SCHOTT Glass Types
- Standard Circular and Square Sizes with 1, 2, or 3mm Thickness
- UV, Visible, and IR Bandpass Regions
OD 2.0 Longpass Filters
- Sharp Cut-On Wavelength
- ≥85% Transmission and OD 2.0 Blocking
- 6mm Square or 12.5/25mm Diameter Sizes
- TECHSPEC® OD 4.0 Longpass Filters Also Available
Reflective Neutral Density (ND) Filters
TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
- Spectrally Flat
- Maximum Accuracy and Neutrality at Moderate Price
- Use Stacks to Create Intermediate Density Values
High Performance OD 4.0 Shortpass Filters
TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
Top Seller
- Broad Transmission and Rejection Ranges
- Sharp Slope for Effective Spectral Discrimination
- Combine with Longpass Filter for Custom Bandpass Ranges
Hoya Absorptive Neutral Density (ND) Filters
Top Seller
- Attenuates Visible Light Via Absorption, Rather than Reflection
- Multiple Filters Can be Stacked for Increased Blocking
- Optical Densities from 0.1 to 4.0 are Available
- Also Available Pre-mounted in C-Mount Housings
Near-IR (NIR) Neutral Density (ND) Filters
TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
- Ideal for NIR Wavelengths 700-1100nm
- Optical Densities Ranging from 0.3 to 3.0
OD 2.0 Shortpass Filters
- Sharp Cut-Off Wavelength
- ≥85% Transmission and OD 2.0 Blocking
- 6mm Square or 12.5/25mm Diameter Sizes
- TECHSPEC® OD 4.0 Shortpass Filters Also Available
Dichroic Shortpass Filters
TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
- Sharp Cut-Off Wavelength
- Broad Transmission and Reflection Ranges
- Available in a Range of Common Sizes
Non-Reflective Neutral Density (ND) Filters
- Prevent Unwanted Reflection Towards the Light Source
- Spectrally Flat
- VIS and NIR Ranges Available
Additive and Subtractive Dichroic Color Filters
- High Saturation Dichroic Type
- Matrix of Sizes and Sets
- Precision Glass Substrate
45° Reflective Dichroic Color Filters
TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
- Reflects Stated Color While Transmitting Remaining Visible Spectrum
- Ideal for Color Separation Applications
- Precision N-BK7 Substrates
Unmounted OD 4.0 Bandpass Filters
TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
Isuzu ISK Colored Glass Heat Absorbing Filters
- Transmit Visible Light, Reject IR Radiation
- Sharp Cutoff and High Absorption at Design Wavelengths
- Available in 12.5, 25, and 50mm Diameters
Mounted Absorptive Neutral Density (ND) Filters
- Spectrally Flat from 400-700nm
- Homogeneous Glass: Blocks by Absorption
- Light/Exposure Control for Imaging
High Performance OD 4.0 Longpass Filters
TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
Top Seller
- Cut-On Slope <1%
- Rejection OD ≥ 4.0
- ≥91% Transmission in Pass Band
- Variety of OD 4.0 Longpass Filter Kits Available
Dichroic Longpass Filters
TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
- Ideal for Fluorescence or Multispectral Imaging
- Sharp Cut-On Wavelength
- Broad Transmission and Reflection Ranges
UV-NIR Neutral Density (ND) Filters
TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
- Constant Transmission from 190 – 1700nm
- Can be Stacked to Create Intermediate Density Values
- Multiple Optical Densities Available
Unmounted Fluorescence Bandpass Filters
TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
- Designed for Use With Common Fluorophores
- Excitation and Emission Filters Available
- High Transmission with Deep >OD 6.0 Blocking
- Mounted Fluorescence Filters and Mounted Fluorescence Filter Sets Also Available
Traditional Coated 400 – 699nm Bandpass Interference Filters
- Available in UV, Visible, and IR Center Wavelengths
- 10 – 80nm Bandwidths Available
- Ideal for Biomedical Applications and Instrumentation Integration
- 193-399nm, 400-699nm, and 700-1650nm CWL Options Available
SCHOTT Colored Glass Heat Absorbing Shortpass Filters
- SCHOTT KG Colored Glass Substrates
- Absorb Infrared Radiation
- Standard Sizes with 1, 2, or 3mm Thickness
Everix Ultra-Thin OD 4.0 Notch Filters
- 300 and 400µm Maximum Thickness Options
- Flexible Structure and Scratch Resistant
- Extruded Thin Film with Sharp Spectral Profiles
Fluorescence Dichroic Filters
TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
- Ideal for Fluorescence or Multispectral Imaging
- Sharp Transition from Reflection to Transmission
- Extended Reflection and Transmission Bands
- High Performance Fluorescence Dichroic Filters are also available
Machine Vision Filter Adapters
TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
- Designed to Couple with TECHSPEC Machine Vision Filters
- Step-Up and Step-Down Adapters to Convert to Larger and Smaller Sizes
- Thin Mount Construction to Prevent Image Degradation
Mounted UV Filters
- Blocks UV and Transmits Visible
- Ideal as Dust or Protective Covers for Camera Sensors
Optical Cast Plastic Color Filters
- Resistant to All Types of Chemicals and Solvents (Acetone, Acids, Alkali and Alcohols)
- Excellent Thermal Resistance
- Easily Drilled with High Speed Carbide Bits for Mounting
Mounted Infrared (IR) Filters
- UV/IR Cut or Infrared (IR) Pass Filters
- Pass Only Visible Light or Pass Only Infrared Light
- IR-Cut are Ideal for Use As Heat-Absorbing Filters
Dichroic Laser Beam Combiners
TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
- Polarization Insensitive
- Hard Sputtered Coating
- Multiple Sizes Available
Colored Glass Replacement Longpass Filters
- Dielectric Coated Longpass Filters
- >90% Typical Transmission and >OD5 Blocking
- 100% Environmentally Safe, RoHS Compliant Construction
- Cut-On Wavelengths from 320 to 1000nm
Empty Filter Mounts
- Ideal for Integrating Filters to Imaging Lenses
- Black Anodized Aluminum Construction
- Common Mounting Sizes and Threads Available
- TECHSPEC® Machine Vision Filters Also Available
Everix Ultra-Thin Broadband Bandpass Filters
- Designed for Common LED and Laser Diode Wavelengths
- Scratch Insensitive, Ultra-Thin Design
- Easily Integrated into Portable Devices
UV-VIS Neutral Density (ND) Filters
TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
- Ideal for 250-700nm Sources
- Optical Densities Ranging from 0.3 to 3.0
Continuously Variable Apodizing Filters
- Bull’s Eye Filter Type Decreases Radially from Center
- Reverse Bull’s Eye Type Increases Radially from Center
- Ideal for Eliminating Intensity Variations in Optical Systems
High Performance Cold Mirrors
TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
- >95% Reflection from 400 - 690nm
- >90% Transmission from 750 - 1200nm
- Optimized for 0° or 45° Angle of Incidence
OD 4.0 Notch Filters
TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
- >OD 4.0 Rejection of Laser Wavelength from 355nm to 1064nm
- Broad Transmission Range
- OD 6.0 Notch Filters Also Available
- Low Cost Alternative to Rugate Notch Filters
Hard Coated OD 4.0 5nm Bandpass Filters
TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
VUV Neutral Density (ND) Filters
- Consistent Transmission from 120-200nm
- Optical Densities Ranging from 0.3 to 3.0
- Ideal for Raman Spectroscopy and Excimer Lasers
High Performance Hot Mirrors
TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
- High Transmission from 400 - 690nm
- High Reflection from 750 - 1125nm
- Ideal for Minimizing Heat Build-Up
Fluorescent Glass Filters
-
Excite with UV Illumination
-
Wide Range of Fluorescence Colors
-
High Sensitivity and Durability
SCHOTT Calibrated Neutral Density (ND) Filters
- Calibrated for Specific Wavelengths
- Optical Densities Ranging from 0.3 to 3.0
- NG3, NG4, NG5, NG9, or NG11 Glass Types
Mounted Linear Glass Polarizing Filters
Top Seller
- Stackable, Rotating Mount for Easy Integration into Imaging Systems
- Eliminate Hot Spots and Reduce Glare
- 95% Polarization Efficiency
- Also Available Unmounted
Traditional Coated 193 – 399nm Bandpass Interference Filters
- Available in UV, Visible, and IR Center Wavelengths
- 10 – 80nm Bandwidths Available
- Ideal for Biomedical Applications and Instrumentation Integration
- 193-399nm, 400-699nm, and 700-1650nm CWL Options Available
Optical Cast Infrared (IR) Longpass Filters
Top Seller
- Lightweight Plastic
- Excellent Thermal and Chemical Resistance
Infrared (IR) Bandpass Filters
New
- Ideal for Gas Analysis
- Center Wavelengths of 2.7-12.4μm
- Single Substrate Interference Filter
Bandpass Interference Filters
Clearance
- Many CWL Options Available
- Ideal for Biomedical Applications and Instrumentation Integration
- Unmounted and Mounted Versions Offered
OD 6.0 Notch Filters
TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
- OD 6.0 Rejection of Laser Wavelength from 355 to 1064 nm
- Broad Transmission Range
- Ideal for Laser-Based Raman, Fluorescence, and Biomedical Systems
- OD 4.0 Notch Filters and OD 6.0 Multi-Notch Filter for Nd:YAG Lasers Also Available
High Performance Fluorescence Dichroic Filters
TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
- Improved Flatness, Transmitted Wavefront, and Surface Quality
- Ideal for Fluorescence Microscopy or High Magnification Imaging Applications
- Most Popular Cut-On Wavelengths of Fluorescence and Longpass Dichroic Filters
- Standard Fluorescence Dichroic Filters are also available
Infrared (IR) Shortpass Filters
- ≥85% Average Transmission over a Broad Infrared Wavelength Range
- OD ≥3.0 Blocking Across Rejection Band
- Common Wavelengths for Environmental and Medical Applications
META® holoOPTIX® Notch Filters
- >OD 4.0 (Typical)
- Broad Transmission Range
- Unique Large Flexible Design
- META® refers to the registered trademark of Meta Materials Inc.
IR Cut-Off Filters
- 710nm Cut-Off Wavelength
- Circular and Rectangular Options
- Various Sizes Available
Extended Hot Mirrors
- Improved NIR Reflectance Over Standard Hot Mirrors
- Operating Temperatures up to 230°C
- Neutral Color for 5500K or 3200K Sources to ±250K
Machine Vision Filter Mounts for 25 and 50mm Diameter Filters
TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
Top Seller
- Specially Designed to Hold 25/25.4mm and 50/50.8mm Diameter Filters
- Accommodate up to 7mm Thicknesses
- Choose from our Full Selection of 25mm or 50mm Diameter Filters
- Premounted Edge Filters and Neutral Density Filters Available
SWIR Longpass Filters
TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
- Block Visible Wavelengths
- Ideal for Machine Vision Applications
- Can Be Used as Cold Mirrors
- Additional Longpass Edge Filters Available
Multi-Band Fluorescence Bandpass Filters
TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
- Multiple Pass Bands on a Single Filter
- High Peak Transmission, Excellent Blocking
- Ideal for Simultaneous Viewing of Multiple Fluorophores
- For Optimal Performance Pair with Multi-Edge Fluorescence Dichroic Filters
Everix Ultra-Thin Shortpass Filters
- Flexible Design to Conform to Curved Surfaces
- Scratch Insensitive, Ultra-thin Polymer Construction
- >80% Average Transmission
Machine Vision Adapters for C and T-Mount Components
New
- Integrate C and T-Mount Components into Imaging Systems
- Compatible with M22.5 to M40.5 Machine Vision Threads
- Step-Up Design Prevents Vignetting
Everix Ultra-Thin OD 6.0 Notch Filters
- OD 6.0 Blocking at Laser Wavelengths from 405 to 1064nm
- 300µm Maximum Thickness
- Flexible and Scratch Insensitive
SCHOTT Matte Colored Glass Filter Plates
New
- Unpolished Colored Glass Plates
- Large Raw Material Sizes up to 165 x 165mm
- Available in All SCHOTT Colored Glass Types
- Polished SCHOTT Colored Glass Filters Also Available
Kodak Wratten Filters
- Ideal for Color Correction and Attenuation
- IR Filters Have No Transmittance from 400 - 700nm
- Powder-Free Latex Gloves Available for Handling
UV Hot Mirrors
- Transmits 80% of UV and Visible Light
- Reflects 70% of IR Light
- Contact Us for Custom Sizes
Experimental Grade Bandpass Interference Filters
Clearance
- Ideal for Selectively Transmitting a Narrow Range of Wavelengths
- Quantities Extremely Limited, Buy While Supplies Last
- For Even More Deals, Check out Mega Clearance: Optics
Machine Vision Absorptive Neutral Density (ND) Filters
- Multiple Mounting Sizes and Threads Available
- 40-20 Surface Quality
- Helps Minimize Pixel Saturation
Cold Mirrors
- 0° and 45° Angle of Incidence Options Available
- Reflects 90% of Visible Light
- Transmits 80% of the NIR and IR
Commercial Grade Reflective Neutral Density Filters
Clearance
- Feature Standard Designs and Specifications
- Constant Density Values Across the Surface
- For More Options, View Precision Quality Reflective Neutral Density Filters
UV Longpass Filters
Clearance
- Ideal for UV Applications
- For use with Longpass and Bandpass Filters
- Various Sizes Available
Circular Variable Neutral Density (ND) Filters
- Continuously Variable Over 270°
- Spectrally Flat from 400-700nm
- Mounted and Unmounted Versions Available
Filter Holders For Imaging Lenses
- Holds 2" Circle or Square Filters
- Provides Male M52 x 0.75 Filter Thread Interface
- Step Down Adapter Options for Other Common Filter Thread
M25.5 and M30.5 Mounted Neutral Density Filters
TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
- VIS and NIR ND Filters, Mounted for Imaging Lenses
- Variety of Optical Densities
- Stack Filters Together for Custom Transmission Profiles
OD 6.0 Multi-Notch Filters for Nd:YAG Lasers
TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
- Deep OD 6.0 Blocking
- Greater than 90% Transmission
- Broad Transmission Range from 325 – 1200nm
- OD 4.0 Notch Filters and OD 6.0 Notch Filters Also Available
High Performance Mounted Machine Vision Filters
TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
- Optimized for Use with Popular LEDs
- Multiple Mounting Sizes and Threads Available to Ease System Compatibility
- Extremely High and Flat Transmission Profiles Provide Even Illumination
Everix Ultra-Thin Longpass Filters
- Ultra-Thin, Flexible Substrate
- Sharp Cut-On Wavelength Designs
- Extruded Thin Film, Insensitive to Scratches
UV Bandpass Filters
Clearance
- Center Wavelengths in the UV from 193nm
- First Surface Bandpass Coating with Protective Overcoat
- 25 and 50mm Diameters Available
SCHOTT NG Gray Glass Neutral Density (ND) Filters
- Tightly Controlled Thickness Specifications
- Standard Thicknesses of 1, 2, and 3mm
- Even Light Attenuation in the Visible Spectrum
- NG1, NG3, NG4, NG5, NG9 and NG11 Glass Types Available
- Precision SCHOTT NG Glass Filters Also Available
Precision Anti-Reflection (AR) Coated Absorptive Neutral Density (ND) Filters
New
- λ/4 Transmitted Wavefront Distortion
- AR Coated for 450 - 700nm
- Optical Densities from 0.1 to 4.0 Available
- Absorptive Neutral Density (ND) Filters Also Available
Near Infrared (NIR) Detection YAGLASS-T Filters
- Convert NIR Light to Visible Light
- Minimum Sensitivity of 30mW/mm2 @ 1064nm for Emission
- Ideal Alternative to Laser Detection Cards for High Power Applications
- Fluorescent Glass Filters for Converting UV to Visible Light Also Available
or view regional numbers
QUOTE TOOL
enter stock numbers to begin
Copyright 2023, Edmund Optics Inc., 101 East Gloucester Pike, Barrington, NJ 08007-1380 USA
California Consumer Privacy Acts (CCPA): Do Not Sell or Share My Personal Information
California Transparency in Supply Chains Act